Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX918W - Asia - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX918W - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 函数
Any use of this information falls under the rules of our disclaimer.
材料文字说明
NORYL GTX™ 918W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high melt flow. NORYL GTX918W resin may be an excellent candidate for automotive under-the-hood and electrical applications requiring the retention of properties while under thermal load.
加工/物理特性价值单位Test Standard
ISO数据
熔体密度 924 kg/m³ -
熔体 0.21 W/(m K) -
熔体的比热 1920 J/(kg K) -
喷射温度 200 °C -
机械性能价值单位Test Standard
ASTM数据
屈服应力 62 MPa ASTM D 638
断裂伸长率 53 % ASTM D 638
弯曲模量 2360 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 202 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
线性热膨胀系数, 平行 80 E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 80 E-6/K ISO 11359-1/-2
ASTM数据
DTUL @ 66 psi 188 °C ASTM D 648
DTUL @ 264 psi 148 °C ASTM D 648
其它性能价值单位Test Standard
密度 1090 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 95 - 105 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.07 % -
注塑熔体温度 270 - 295 °C -
模具温度 65 - 95 °C -
1区 255 - 295 °C -
2区 260 - 295 °C -
3区 265 - 295 °C -
螺杆转速 20 - 100 rpm -
背压 0.3 - 1.4 MPa -
函数
粘度－剪切速度 , NORYL GTX™ Resin GTX918W - Asia, (PPE+PA*), SABIC
剪切应力－剪切速度 , NORYL GTX™ Resin GTX918W - Asia, (PPE+PA*), SABIC
比容－温度(pvT) , NORYL GTX™ Resin GTX918W - Asia, (PPE+PA*), SABIC
典型数据
加工方法
注塑
应用
汽车
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.